ITC Dostec AC Bombas dosificadoras de pistón Advanced Control 600 l/h 4.5bar conexión: 3/4" NPT
160-140-10PC20600-4.5-PB
Tiempo de envío si no hay stock::
2-4 semaines
En caso de falta de stock::
SÓLO SE REPONDE SI LO PIDES
Referencia interna:
160-140-10PC20600-4.5-PB
Dostec AC is a diaphragm or piston dosing pump with advanced control for an accurate and efficient automatic dosing.
This series allows many dosing possibilities depending on the chosen head.
The flow of 600 l/h (159 gph), pressures of 4.5 bar (65 psi)
Cylinder/piston/valve: PP- PEUAPM
Valve-ball: PP - Boro
Voltage: 230V - 0.43kW - 1 phase
Suciton lift: 1.5m (5')
The correct selection of head’s materials, PP, PVDF or S.S., makes this pump suitable for the most chemicals products used in water treatment, chemical industry, food and beverage and agriculture.
Operation modes
Manual: manual flow adjustment through the keyboard
Analogue: dosing flow proportional to a 0/4-20mA signal
Proportional to flow: proportional dosing to a water flow
Proportional to pulses: stroke frequency proportional to input pulses
Batch control, by volume: dosing a defined volume, after a manual, remote or time pre-set start
Batch control, by time: dosing for a defined time, after a manual, remote or time pre-set start
ModBus: dosing control through ModBus RTU protocol
Dostec AC Cloud manager Manuel EN
Batch mode configuration with APP
Cloud manager Proportional mode
| Outer tube diameter (O.D.) | 3/4 " |
| Order-driven inventory | |
| Dosage rate | Many possibilities |
| Water flow | Works regardless of water flow |
| Working pressure | Upcoming info |
| Dosing flow | N/A |
| Outer tube diameter (O.D.) | Upcoming info |
| Connection type | Upcoming info |
Enviar un ticket
Dostec AC is a diaphragm or piston dosing pump with advanced control for an accurate and efficient automatic dosing.
This series allows many dosing possibilities depending on the chosen head.
The flow of 600 l/h (159 gph), pressures of 4.5 bar (65 psi)
Cylinder/piston/valve: PP- PEUAPM
Valve-ball: PP - Boro
Voltage: 230V - 0.43kW - 1 phase
Suciton lift: 1.5m (5')
The correct selection of head’s materials, PP, PVDF or S.S., makes this pump suitable for the most chemicals products used in water treatment, chemical industry, food and beverage and agriculture.
Operation modes
Manual: manual flow adjustment through the keyboard
Analogue: dosing flow proportional to a 0/4-20mA signal
Proportional to flow: proportional dosing to a water flow
Proportional to pulses: stroke frequency proportional to input pulses
Batch control, by volume: dosing a defined volume, after a manual, remote or time pre-set start
Batch control, by time: dosing for a defined time, after a manual, remote or time pre-set start
ModBus: dosing control through ModBus RTU protocol
Dostec AC Cloud manager Manuel EN
Batch mode configuration with APP
Cloud manager Proportional mode