Electrical valve with solenoid and diaphragm. Made of PVC plastic, this valve installs on an irrigation system and must be connected to a controller using an electric wire. It is also possible to manually open/close the valve by turning a quarter turn of the solenoid using the handle marked "ON / OFF" on the top.
Model | 100-PGA (PGA serie) |
Configuration | Globe and angle configuration for flexibility in design and installation (A special plug (included) allows to change the configuration if necessary) |
Inlet x Outlet size | 1'' FPT x 1'' FPT |
Flow | 2.2 to 150 gpm |
Pressure | 15 to 150 PSI (1.0 to 10.4 bar) |
Maximum water temperature | 43°C (110°F) |
Electrical specifications |
24 VAC 50/60 Hz (cycles per second) solenoid Inrush current: 0.41A (9.9VA) Holding current: 0.14A (3.43VA) Coil resistance: 30-39 Ohms |
Size | 7 1/4" x 5 1/2" x 3 1/4" (18.4 x 14.0 x 8.3 cm) |
Electrical valve with solenoid and diaphragm. Made of PVC plastic, this valve installs on an irrigation system and must be connected to a controller using an electric wire. It is also possible to manually open/close the valve by turning a quarter turn of the solenoid using the handle marked "ON / OFF" on the top.
Model | 100-PGA (PGA serie) |
Configuration | Globe and angle configuration for flexibility in design and installation (A special plug (included) allows to change the configuration if necessary) |
Inlet x Outlet size | 1'' FPT x 1'' FPT |
Flow | 2.2 to 150 gpm |
Pressure | 15 to 150 PSI (1.0 to 10.4 bar) |
Maximum water temperature | 43°C (110°F) |
Electrical specifications |
24 VAC 50/60 Hz (cycles per second) solenoid Inrush current: 0.41A (9.9VA) Holding current: 0.14A (3.43VA) Coil resistance: 30-39 Ohms |
Size | 7 1/4" x 5 1/2" x 3 1/4" (18.4 x 14.0 x 8.3 cm) |
Outer tube diameter (O.D.) | 1 " |
Connection type | Female pipe thread (FPT) |
Connection type | FPT x FPT |