RSU-Current - Remote Sensing Units 0-34kPa, 1/8" MPT
160-110-073000
This RSU block "Remote Sensing Units" Current is installed on an MLT model tensiometer and sends a 4-20 mA signal. This signal can then be read by a standalone controller or a greenhouse environment control system such as Argus.
| Model | RSU-C 0-34 cb (kPa) for use with MLT model tensiometer |
| Include |
RSU block with 1/8" MPT connection 36" (90 cm) long 2-conductor cable |
| Supply |
12–24 VDC |
| Output (current) |
4-20mA |
| Calibration |
4-20mA = 0-34 kPa (0.471 mA per kPa) |
This RSU block "Remote Sensing Units" Current is installed on an MLT model tensiometer and sends a 4-20 mA signal. This signal can then be read by a standalone controller or a greenhouse environment control system such as Argus.
| Model | RSU-C 0-34 cb (kPa) for use with MLT model tensiometer |
| Include |
RSU block with 1/8" MPT connection 36" (90 cm) long 2-conductor cable |
| Supply |
12–24 VDC |
| Output (current) |
4-20mA |
| Calibration |
4-20mA = 0-34 kPa (0.471 mA per kPa) |
| Control | By computer |
| Model | MLT |
| Block type | RSU-Current 0-34 kPa |
| Sensor Type | Soil moisture |
Submit a Ticket
Accessories:
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
People who buy this product also buy:
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Recently viewed products:
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.