LTA level transducer 10PSI 40'cable / 23.1'deep
160-110-061200
                        Availability: 
                            backordered
                        
                        Shipping time if backordered:: 
                            jusqu'à 2 semaines
                        
                        In case of backorder:: 
                            Only replenished IF YOU ORDER IT
                        
                
The LTA level transducer is a probe that can be used to assess the water level of a tank This submersible probe is specifically designed to meet the harsh environments encountered in liquid level and control measurements.
This liquid level probe can be installed inside a water or fertilizer solution tank and then must be connected to a controller, an Argus system or antother greenhouse computer that can read it and then control a related equipment. As an example, the controller can then actuate and / or stop a pump to fill a tank to a precise level.
This probe is drop-in type, so very easy to install.
| Switch type
 | Submersible hydrostatic level transducer | 
| Pressure range (PSI)
 | 0-10 PSI | 
| Maximum water height (feet)
 | 23.1' (693cm) | 
| Accuracy
 | ±0.1% | 
| Operation temperature
 | -20 to 60 ºC | 
| Size (float)
 | 25.4 mm (1") wide x 149.8 mm (5.9'') height | 
| Wire lenght
 | 127 mm (5") | 
| Wire type
 | 22 AWG | 
| Material (float)
 | Stainless steel body 316 | 
The LTA level transducer is a probe that can be used to assess the water level of a tank This submersible probe is specifically designed to meet the harsh environments encountered in liquid level and control measurements.
This liquid level probe can be installed inside a water or fertilizer solution tank and then must be connected to a controller, an Argus system or antother greenhouse computer that can read it and then control a related equipment. As an example, the controller can then actuate and / or stop a pump to fill a tank to a precise level.
This probe is drop-in type, so very easy to install.
| Switch type
 | Submersible hydrostatic level transducer | 
| Pressure range (PSI)
 | 0-10 PSI | 
| Maximum water height (feet)
 | 23.1' (693cm) | 
| Accuracy
 | ±0.1% | 
| Operation temperature
 | -20 to 60 ºC | 
| Size (float)
 | 25.4 mm (1") wide x 149.8 mm (5.9'') height | 
| Wire lenght
 | 127 mm (5") | 
| Wire type
 | 22 AWG | 
| Material (float)
 | Stainless steel body 316 | 
| Control | By computer | 
| Order-driven inventory | |
| Sensor Type | Liquid level |