12" LT tensiometer + RSU-Current 0-34 kPa, Ø 0.875" (blue ceramic)
160-110-072700-ARCHIVE
This product is no longer available.
- Tensiometer_Irrometer_Automation_wire_extension-FT_V2016-10_EN.pdf
- Tensiometer_Irrometer_Automation_RSU-C-34-Manual_V2016-04-18_EN.pdf
- Tensiometer_Irrometer_Reference_book-Manual_V2015-02_EN.pdf
- Tensiometer_Irrometer_Quick_installation_guide_V2012-02_EN.pdf
- Tensiometer_Irrometer_Recommendations_sensor_interpretations_V2013-03_EN.pdf
- Tensiometer_Irrometer_Irrigation_design-Manual_V2006-01-20_EN.pdf
Availability:
backordered
Shipping time if backordered::
jusqu'à 2 semaines
In case of backorder::
Only replenished IF YOU ORDER IT
"LT" (low tension) model is designed for situations where tensions above 30 cb (kPa) are rarely expected. Ideal for very coarse soils and non-soil container-media such as in greenhouses crops or where rapidly changing soil water status needs to be observed. Incorporates a replaceable Quick-Flo tip (blue color).
- For optimal irrigation management
- Measures the tension of a substrate (water availability) on a window from 0 to 34 kPa. This
sensor requires an electronic interface (control computer or controller) for an accurate reading of
the tension of the substrate. - When using the combined STERLING + tensiometer + stand-alone controller, you can set the
STERLING to wait for a desired tension before irrigation begins to limit the cracking of
tomatoes and promote deeper roots. - In addition, a producer who is scheduled to be absent may program the stand-alone
Retains afternoon irrigation schemes if the plant has not consumed water
Available due, for example, to the presence of clouds.
Model | LT (low tension) + RSU-C block 0-34 cb (kPa) |
Include | Tensiometer and RSU block with wire 1/8'' NPT x about 2.5'' long |
Height from the bottom of the RSU block | 12" |
Total height | 18" |
Tensiometer tube diameter | 0,875" |
RSU block reading window | 0-34 kPa |
Supply | 12–24 VDC |
Output (current) | 4-20mA |
Calibration | 4-20mA = 0-34 kPa (0.471 mA per kPa) |
"LT" (low tension) model is designed for situations where tensions above 30 cb (kPa) are rarely expected. Ideal for very coarse soils and non-soil container-media such as in greenhouses crops or where rapidly changing soil water status needs to be observed. Incorporates a replaceable Quick-Flo tip (blue color).
- For optimal irrigation management
- Measures the tension of a substrate (water availability) on a window from 0 to 34 kPa. This
sensor requires an electronic interface (control computer or controller) for an accurate reading of
the tension of the substrate. - When using the combined STERLING + tensiometer + stand-alone controller, you can set the
STERLING to wait for a desired tension before irrigation begins to limit the cracking of
tomatoes and promote deeper roots. - In addition, a producer who is scheduled to be absent may program the stand-alone
Retains afternoon irrigation schemes if the plant has not consumed water
Available due, for example, to the presence of clouds.
Model | LT (low tension) + RSU-C block 0-34 cb (kPa) |
Include | Tensiometer and RSU block with wire 1/8'' NPT x about 2.5'' long |
Height from the bottom of the RSU block | 12" |
Total height | 18" |
Tensiometer tube diameter | 0,875" |
RSU block reading window | 0-34 kPa |
Supply | 12–24 VDC |
Output (current) | 4-20mA |
Calibration | 4-20mA = 0-34 kPa (0.471 mA per kPa) |
Control | By computer |
Length | 12" |
Model | LT |
Block type | RSU-Current 0-34 kPa |
Order-driven inventory | |
Sensor Type | Soil moisture |