Inverseur moteur 115-400 Volts 1.6-2.5A 50/60hz IP54 RIdder RMC400
160-120-061210
Disponibilité:
en stock
Délai d’expédition si en rupture de stock:
2-6 semaines
En cas de rupture de stock:
Habituellement maintenu en inventaire, sera disponible bientôt
RMC400 Inverter (starter) configured to Ridder Motor for greenhouse roof or vent system.
The RMC400 can be used throughout the world with 3-phase supply voltages of 208 V to 600 V and 1-phase supply voltages of 120 V to 230 V for 50 Hz and 60 Hz mains frequencies.
The RMC400 is prepared for the use of a Ridder PositioningUnit RPU (RW motor-gearbox). The RMC400 has a 24 V DC power connection and reference position outputs (end positions).
External activation of the RMC400 is possible with a 24 V AC/DC control signal or (optional) external manual controls. The RMC400 monitors the control input. The motor gearbox is not activated if there is simultaneous activation in two directions of rotation.
RMC400 Inverter (starter) configured to Ridder Motor for greenhouse roof or vent system.
The RMC400 can be used throughout the world with 3-phase supply voltages of 208 V to 600 V and 1-phase supply voltages of 120 V to 230 V for 50 Hz and 60 Hz mains frequencies.
The RMC400 is prepared for the use of a Ridder PositioningUnit RPU (RW motor-gearbox). The RMC400 has a 24 V DC power connection and reference position outputs (end positions).
External activation of the RMC400 is possible with a 24 V AC/DC control signal or (optional) external manual controls. The RMC400 monitors the control input. The motor gearbox is not activated if there is simultaneous activation in two directions of rotation.
| Maintenu en stock |