Performa Globalys 18-9-18+ soluble mix
100-140-012800
Performa Globalys™ 18-9-18 + fertilizer no urea formulation, high nitrate and increased micronutrient ratio with iron supplement. More than half of nitrogen is under nitrate form for quick absorption. It is a magnesium source. Iron, manganese and zinc are higher than in other fertilizers to compensate for assimilation problems due to higher pH. This fertilizer helps to prevent pH increase due to high water alkalinity.
|
Guaranteed minimum analysis |
|
|
Total nitrogen (N) |
18 % |
|
Ammoniacal nitrogen (NH4) |
8.8 % |
|
Nitrate nitrogen (NO3) |
9.2% |
|
Urea (CO(NH2)2) |
- |
|
Available phosphate (P2O5) |
9 % |
|
Soluble potash (K2O) |
18 % |
|
Calcium (Ca) |
- |
|
Magnesium (Mg) |
0.3 % |
|
Sulphur (S) |
4.2 % |
|
Boron (actual) (B) |
0.02 % |
|
Chelated copper EDTA (actual) (Cu) |
0.05 % |
|
Chelated* iron (actual) (Fe) |
0.25 % |
|
Chelated iron EDTA (Fe) |
0.14 % |
|
Chelated iron DTPA (Fe) |
- |
|
Chelated iron EDDHA (Fe) |
0.11 % |
|
Chelated manganese EDTA (actual) (Mn) |
0.0075 % |
|
Molybdenum (actual) (Mo) |
0.0015 % |
|
Chelated zinc EDTA (actual) (Zn) |
0.0075 % |
|
POTENTIAL ACIDITY: 310 kg/metric ton (694 lbs/ton) of CaCO3. |
|
|
SOLUBILITY (max@20°C): 350 g/l (2.65 lbs/gallon). |
|
*All our + formulations contain types of chelated iron that are available for absorption over a wide pH scale (3.5 to 9.0).
Performa Globalys™ 18-9-18 + fertilizer no urea formulation, high nitrate and increased micronutrient ratio with iron supplement. More than half of nitrogen is under nitrate form for quick absorption. It is a magnesium source. Iron, manganese and zinc are higher than in other fertilizers to compensate for assimilation problems due to higher pH. This fertilizer helps to prevent pH increase due to high water alkalinity.
|
Guaranteed minimum analysis |
|
|
Total nitrogen (N) |
18 % |
|
Ammoniacal nitrogen (NH4) |
8.8 % |
|
Nitrate nitrogen (NO3) |
9.2% |
|
Urea (CO(NH2)2) |
- |
|
Available phosphate (P2O5) |
9 % |
|
Soluble potash (K2O) |
18 % |
|
Calcium (Ca) |
- |
|
Magnesium (Mg) |
0.3 % |
|
Sulphur (S) |
4.2 % |
|
Boron (actual) (B) |
0.02 % |
|
Chelated copper EDTA (actual) (Cu) |
0.05 % |
|
Chelated* iron (actual) (Fe) |
0.25 % |
|
Chelated iron EDTA (Fe) |
0.14 % |
|
Chelated iron DTPA (Fe) |
- |
|
Chelated iron EDDHA (Fe) |
0.11 % |
|
Chelated manganese EDTA (actual) (Mn) |
0.0075 % |
|
Molybdenum (actual) (Mo) |
0.0015 % |
|
Chelated zinc EDTA (actual) (Zn) |
0.0075 % |
|
POTENTIAL ACIDITY: 310 kg/metric ton (694 lbs/ton) of CaCO3. |
|
|
SOLUBILITY (max@20°C): 350 g/l (2.65 lbs/gallon). |
|
*All our + formulations contain types of chelated iron that are available for absorption over a wide pH scale (3.5 to 9.0).
| Nitrogen type | N-NH4 (ammonium) |
| Effect on pH | Lower pH |
| Chemical formula | Fertilizer blend |
| Iron type | Fe-EDDHA (pH 3.5-10) |
| Nitrogen type | N-NO3 (nitrate) |
| Iron type | Fe-EDTA (pH 1.5-6.5) |
| State | Soluble |
| Source of | N (nitrogen) |
| Packaging | Polyethylene bag |
| Source of | P (phosphorus) |
| Source of | K (potassium) |
| Source of | Mg (magnesium) |
| Source of | S (sulfur) |
| Source of | Fe (iron) |
| Source of | Mn (manganese) |
| Source of | Zn (zinc) |
| Source of | Cu (copper) |
| Source of | B (boron) |
| Source of | Mo (molybdate) |
| Quantity per skid | 66 |