Clearance product
Turbulent emitter or pressure-compensated drippers used to maintain uniform consistency along the irrigation line (contains a labyrinth), but unlike the Woodpecker dripper, the SOE50 emitter does NOT allow dripping to drip after stopping of the system. These products require the use of a filter of at least 120 mesh and operate at an optimum pressure of 35 PSI.
This screw-on emitter is installed (screwed) at the end of a microtube to be placed directly in a pot, or screwed directly onto an irrigation line to form a drip line.
| Model | SOE50 SIZE 1/2GPH SCREW ON EMITTER RED |
| Required tubing | Microtubing 125'' ID - 197'' OD (3 mm x 5 mm) polyethylene (PE) |
| Required punch size | Punch 2.5 mm |
| Quantity per package | 100 / bag |
Clearance product
Turbulent emitter or pressure-compensated drippers used to maintain uniform consistency along the irrigation line (contains a labyrinth), but unlike the Woodpecker dripper, the SOE50 emitter does NOT allow dripping to drip after stopping of the system. These products require the use of a filter of at least 120 mesh and operate at an optimum pressure of 35 PSI.
This screw-on emitter is installed (screwed) at the end of a microtube to be placed directly in a pot, or screwed directly onto an irrigation line to form a drip line.
| Model | SOE50 SIZE 1/2GPH SCREW ON EMITTER RED |
| Required tubing | Microtubing 125'' ID - 197'' OD (3 mm x 5 mm) polyethylene (PE) |
| Required punch size | Punch 2.5 mm |
| Quantity per package | 100 / bag |
| Part type | Dripper (pellet) |
| Part type | Stake / Weight |
| Microtube required | 125-197" (3.18/5mm) tube |
| Clearance: condition | New |
| Guarantee | No guarantee |
| Cause of liquidation | Discontinued model: when all units of this product will be sold, this item will no longer be available. |
| Quantity per pack | 100 |
| Order-driven inventory |