6" MLT tensiometer + RSU-Current 0-100 kPa, Ø 0.25" (blue ceramic)
160-110-072600
- Tensiometer_Irrometer_Model_MLT-FT_V2014-03_EN.pdf
- Tensiometer_Irrometer_Automation_RSU-C-34-Manual_V2016-04-18_EN.pdf
- Tensiometer_Irrometer_Reference_book-Manual_V2015-02_EN.pdf
- Tensiometer_Irrometer_Quick_installation_guide_V2012-02_EN.pdf
- Tensiometer_Irrometer_Recommendations_sensor_interpretations_V2013-03_EN.pdf
- Tensiometer_Irrometer_Irrigation_design-Manual_V2006-01-20_EN.pdf
Disponibilité:
in stock
Délai d’expédition si en rupture de stock:
jusqu'à 2 semaines
En cas de rupture de stock:
Usually kept in stock, will be available soon
Ideal for very coarse soils and non-soil container-media such as in greenhouses crops or where rapidly changing soil water status needs to be observed. Includes a replaceable Quick-Flo (blue).
The model "MLT" tensiometer is ideal for very coarse soils and potting substrates. Its size makes it a good choice for taking reading in small pots.
- For optimal irrigation management
- Measures the tension of a substrate (water availability) on a window from 0 to 100 kPa. This
sensor requires an electronic interface (control computer or controller) for an accurate reading of
the tension of the substrate. - When using the combined STERLING + tensiometer + stand-alone controller, you can set the
STERLING to wait for a desired tension before irrigation begins to limit the cracking of
tomatoes and promote deeper roots. - In addition, a producer who is scheduled to be absent may program the stand-alone
Retains afternoon irrigation schemes if the plant has not consumed water
Available due, for example, to the presence of clouds.
| Model | MLT (miniature low tension) + RSU-C block 0-100 (kPa) |
| Include | Tensiometer and RSU block with wire 1/8'' NPT x about 2.5 '' long |
| Height from the bottom of the tube to the hole for the RSU block | 6'' |
| Total height | 7'' |
| Tensiometer tube diameter | 0.5" |
| RSU block reading window | 0-100 kPa |
| Supply | 9–36 VDC |
| Output (current) | 4-20mA |
| Calibration | 4-20mA = 0-34 kPa (0.471 mA per kPa) |
Ideal for very coarse soils and non-soil container-media such as in greenhouses crops or where rapidly changing soil water status needs to be observed. Includes a replaceable Quick-Flo (blue).
The model "MLT" tensiometer is ideal for very coarse soils and potting substrates. Its size makes it a good choice for taking reading in small pots.
- For optimal irrigation management
- Measures the tension of a substrate (water availability) on a window from 0 to 100 kPa. This
sensor requires an electronic interface (control computer or controller) for an accurate reading of
the tension of the substrate. - When using the combined STERLING + tensiometer + stand-alone controller, you can set the
STERLING to wait for a desired tension before irrigation begins to limit the cracking of
tomatoes and promote deeper roots. - In addition, a producer who is scheduled to be absent may program the stand-alone
Retains afternoon irrigation schemes if the plant has not consumed water
Available due, for example, to the presence of clouds.
| Model | MLT (miniature low tension) + RSU-C block 0-100 (kPa) |
| Include | Tensiometer and RSU block with wire 1/8'' NPT x about 2.5 '' long |
| Height from the bottom of the tube to the hole for the RSU block | 6'' |
| Total height | 7'' |
| Tensiometer tube diameter | 0.5" |
| RSU block reading window | 0-100 kPa |
| Supply | 9–36 VDC |
| Output (current) | 4-20mA |
| Calibration | 4-20mA = 0-34 kPa (0.471 mA per kPa) |
| Control | By computer |
| Length | 6" |
| Model | MLT |
| Inventory stocked | |
| Block type | RSU-Current 0-34 kPa |
| Sensor Type | Soil moisture |