6" MLT tensiometer + RSU-Current 0-34 kPa, Ø 0.25" (blue ceramic)

160-110-072600

https://ghlinc.odoo.com/web/image/product.template/3955/image_1920?unique=987bbd0
Unit(s)

254.28 $ CAD / Unit(s) 254.28 CAD 254.28 $ CAD

254.28 $ CAD

    This combination does not exist.


     

    The model "MLT" (miniature low tension) is designed, as is the "LT" model for situations where voltages above 30 cb (kPa) are rarely expected. Ideal for very coarse soils and non-soil container-media such as in greenhouses crops or where rapidly changing soil water status needs to be observed.  Includes a replaceable Quick-Flo (blue) but smaller in size than the "LT" tip.

    The model "MLT" tensiometer is ideal for very coarse soils and potting substrates. Its size makes it a good choice for taking reading in small pots.

     

    • For optimal irrigation management
    • Measures the tension of a substrate (water availability) on a window from 0 to 34 kPa. This
      sensor requires an electronic interface (control computer or controller) for an accurate reading of
      the tension of the substrate.
    • When using the combined STERLING + tensiometer + stand-alone controller, you can set the
      STERLING to wait for a desired tension before irrigation begins to limit the cracking of
      tomatoes and promote deeper roots.
    • In addition, a producer who is scheduled to be absent may program the stand-alone
      Retains afternoon irrigation schemes if the plant has not consumed water
      Available due, for example, to the presence of clouds.

     

    Model MLT (miniature low tension) + RSU-C block 0-34 cb (kPa)
    Include Tensiometer and RSU block with wire 1/8'' NPT x about 2.5 '' long
    Height from the bottom of the tube to the hole for the RSU block 6''
    Total height 7''
    Tensiometer tube diameter 0.5"
    RSU block reading window 0-34 kPa
    Supply 12–24 VDC
    Output (current) 4-20mA
    Calibration 4-20mA = 0-34 kPa (0.471 mA per kPa)

     

    The model "MLT" (miniature low tension) is designed, as is the "LT" model for situations where voltages above 30 cb (kPa) are rarely expected. Ideal for very coarse soils and non-soil container-media such as in greenhouses crops or where rapidly changing soil water status needs to be observed.  Includes a replaceable Quick-Flo (blue) but smaller in size than the "LT" tip.

    The model "MLT" tensiometer is ideal for very coarse soils and potting substrates. Its size makes it a good choice for taking reading in small pots.

     

    • For optimal irrigation management
    • Measures the tension of a substrate (water availability) on a window from 0 to 34 kPa. This
      sensor requires an electronic interface (control computer or controller) for an accurate reading of
      the tension of the substrate.
    • When using the combined STERLING + tensiometer + stand-alone controller, you can set the
      STERLING to wait for a desired tension before irrigation begins to limit the cracking of
      tomatoes and promote deeper roots.
    • In addition, a producer who is scheduled to be absent may program the stand-alone
      Retains afternoon irrigation schemes if the plant has not consumed water
      Available due, for example, to the presence of clouds.

     

    Model MLT (miniature low tension) + RSU-C block 0-34 cb (kPa)
    Include Tensiometer and RSU block with wire 1/8'' NPT x about 2.5 '' long
    Height from the bottom of the tube to the hole for the RSU block 6''
    Total height 7''
    Tensiometer tube diameter 0.5"
    RSU block reading window 0-34 kPa
    Supply 12–24 VDC
    Output (current) 4-20mA
    Calibration 4-20mA = 0-34 kPa (0.471 mA per kPa)

    Control By computer
    Length 6"
    Model MLT
    Block type RSU-Current 0-34 kPa
    Sensor Type Soil moisture

    Submit a Ticket

    Accessories:

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.

    People who buy this product also buy:

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.

    Recently viewed products:

    Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.