18" LT tensiometer + RSU-Current 0-34 kPa, Ø 0.875" (blue ceramic)
160-110-072800
- Tensiometer_Irrometer_Model_SR-FT_V2014_03_EN.pdf
- Tensiometer_Irrometer_Automation_RSU-C-34-Manual_V2016-04-18_EN.pdf
- Tensiometer_Irrometer_Reference_book-Manual_V2015-02_EN.pdf
- Tensiometer_Irrometer_Quick_installation_guide_V2012-02_EN.pdf
- Tensiometer_Irrometer_Recommendations_sensor_interpretations_V2013-03_EN.pdf
- Tensiometer_Irrometer_Irrigation_design-Manual_V2006-01-20_EN.pdf
"LT" (low tension) model is designed for situations where tensions above 30 cb (kPa) are rarely expected. Ideal for very coarse soils and non-soil container-media such as in greenhouses crops or where rapidly changing soil water status needs to be observed. Incorporates a replaceable Quick-Flo tip (blue color).
- For optimal irrigation management
- Measures the tension of a substrate (water availability) on a window from 0 to 34 kPa. This
sensor requires an electronic interface (control computer or controller) for an accurate reading of
the tension of the substrate. - When using the combined STERLING + tensiometer + stand-alone controller, you can set the
STERLING to wait for a desired tension before irrigation begins to limit the cracking of
tomatoes and promote deeper roots. - In addition, a producer who is scheduled to be absent may program the stand-alone
Retains afternoon irrigation schemes if the plant has not consumed water
Available due, for example, to the presence of clouds.
| Model | LT (low tension) + RSU-C block 0-34 cb (kPa) |
| Include | Tensiometer and RSU block with wire 1/8'' NPT x about 2.5'' long |
| Height from the bottom of the RSU block | 18" |
| Total height | 24" |
| Tensiometer tube diameter | 0,875" |
| RSU block reading window | 0-34 kPa |
| Supply | 12–24 VDC |
| Output (current) | 4-20mA |
| Calibration | 4-20mA = 0-34 kPa (0.471 mA per kPa) |
"LT" (low tension) model is designed for situations where tensions above 30 cb (kPa) are rarely expected. Ideal for very coarse soils and non-soil container-media such as in greenhouses crops or where rapidly changing soil water status needs to be observed. Incorporates a replaceable Quick-Flo tip (blue color).
- For optimal irrigation management
- Measures the tension of a substrate (water availability) on a window from 0 to 34 kPa. This
sensor requires an electronic interface (control computer or controller) for an accurate reading of
the tension of the substrate. - When using the combined STERLING + tensiometer + stand-alone controller, you can set the
STERLING to wait for a desired tension before irrigation begins to limit the cracking of
tomatoes and promote deeper roots. - In addition, a producer who is scheduled to be absent may program the stand-alone
Retains afternoon irrigation schemes if the plant has not consumed water
Available due, for example, to the presence of clouds.
| Model | LT (low tension) + RSU-C block 0-34 cb (kPa) |
| Include | Tensiometer and RSU block with wire 1/8'' NPT x about 2.5'' long |
| Height from the bottom of the RSU block | 18" |
| Total height | 24" |
| Tensiometer tube diameter | 0,875" |
| RSU block reading window | 0-34 kPa |
| Supply | 12–24 VDC |
| Output (current) | 4-20mA |
| Calibration | 4-20mA = 0-34 kPa (0.471 mA per kPa) |
| Control | By computer |
| Model | LT |
| Length | 18" |
| Block type | RSU-Current 0-34 kPa |
| Sensor Type | Soil moisture |
Submit a Ticket
Accessories:
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
People who buy this product also buy:
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.
Recently viewed products:
Your Dynamic Snippet will be displayed here... This message is displayed because you did not provided both a filter and a template to use.